AV Installation York at St Edwards Church with the install of a HDMI 8 way distribution system & six HDMI over CAT5 senders and receivers along with a Maxone PTZ camera and controller. We also provided the church with a preview monitor housed in a custom built wooden case.
We have replaced their old VGA system with a new Kramer HDMI over DGKAT 6 distribution system which feeds five large screen TV’s installed around the church giving them a much better picture quality.
Part of the installation was to provide a preview monitor for the priest so we had a custom built cabinet made by Quadra AV cabinets which houses a Samsung 22″ monitor screen.
At the front of the church we installed a Kramer HDMI over CAT 6 wall plate so that they can use their laptop at the front of the church.
Within the existing wooden cabinet we have re-used their existing Kramer scaler and installed a 1 in 8 out HDMI distribution amplifier along with six HDMI over CAT6 senders and a Kramer HDMI over CAT6 receiver which receives its signal from the wall plate.
Another part of the AV installation was to replace their existing fixed CCTV camera which displays the altar on all of the screens and also sends the feed into the main hall.
We opted to use a Maxone Pan & Tilt high definition dome camera and controller which we installed in the same position but this gives them the facility to position it remotely to any part of the front of the church.
AV Installations YorkShare